Toole Mustard Gas Sampling Gloveboxes
The Tooele Army Depot located in Utah stockpiles thousands of munitions including bombs, land mines and a one-ton storage container loaded with nerve gas and blister agents. It was discovered that the incinerator used to destroy the deadly compounds was leaking. These leaking munitions had to be specifically double-packed until they could be destroyed.
S.A.Technology was tasked with designing and building a sampling system for Mustard Agent ton containers in two igloo used to house the deadly chemical. Engineering designs were based on economic analysis, resistance to fluid corrosive factors and loading factors. SAT provided six shielded gloveboxes, a sampling system, and a container handling system to remotely sample the mustard gas storage containers.
Drum Dump Glovebox
- - 4 - operator stations
- - 1 - 120v 15 amp electrical drop
- - 1 - 30” bagin port
- - 1 – 12” bagout port
- - 1 – 30” floor bagout
- - 10 - gloveports
- - HEPA Filtration
- - DP gage
- - Air inlet/outlet are 6” flanged ports
- - Carbon steel body and frame work w/ 4 ml epoxy coating
- - Internal stainless steel hoist beam w/ ¼ ton capacity
- - Skid Mounted
- - Fire Door
- - SWB bagout adaptor
- - Oval gloveport ring
- - Absorption Area
- - Integrated Air Flow Control
Related Project Description Links
Drum Venting System Sort Room (DVSSR)
- - Single manned airlock with
- - 20 – 1” piping pass-throughs
- - Air inlets/outlets
- - 3 –Floor process drains one located in each containment compartment
- - 2 – Magnahelics 1 - Process door
- - 3 – Removable window panels
- - 6 – Exterior roof light panels
- - 4 – Manned egress/exit doors
- - Carbon steel body and frame work with dry film epoxy of 4-mil
- - Inner piping system
- - Overhead gantry rail and trolley
- - Integrated air flow control
- Gravity conveyor belt
- HEPA Filtration System
Related Project Description Links
Drum Venting System
- - Single Airlock
- - Hard Wall Glovebox Containment
- - 20 piping pass thrus
- - 7 – Operating stations
- - 3 – Exterior roof lighting fixtures
- - 2 axis Hoist trolley
- - Single loading door
- - 14 – Gloveports
- - Conveyor belt
- - Manipulators
- - Specialized Interior Paint coating
Related Project Description Links
SWB Processing Glovebox
- - Large SWB loading area with tipping device
- - 1- 30” bag out
- - 1 – Absorption area
- - Manual saw for SWB lid removal
- - SWB bagout port
- - 1000 lb hoist trolley
- - 15 - Gloveports
- - HEPA Filtration and DP gage
- - Carbon steel body and frame with dry film epoxy of 4-mil
- - Skid Mounted
- - Manipulator
- - SWB and Drum lifts and scales
- - Integrated flow control
- - Manual size reduction area
- - Robotic size reduction areaa
Related Project Description Links
Inner Tent Chamber
- - Mobile conveyor/ lift table
- - 10 - Operator positions
- - 2- 30” bag-in / bag-out ports
- - Large opening loading doors
- - HEPA filtration
- - SWB bagout port
- - Carbon steel body and frame with dry film epoxy of 4-mil
- - DP gage
- - 6 - Exterior mounted lights
- - Gantry mounted electric or hydraulic remote manipulators
- - Quick connect tooling for manipulator
- - Plasma torch and Plasma curtains
- - Reciprocal saw
- - Nibbler
- - Torque wrench
- - Shear
- - Tool lifting arms
Related Project Description Links
Waste Processing Tools
S.A.Technology has proven time and time again that we are a reliable source for waste processing and handling systems for a variety of hazardous materials. From drum dump boxes to remote operated telehandlers, S.A.Technology has the resources and capabilities to meet the strict and meticulous requirements needed to move and store hazardous materials. To make work safer and easier for our clients’ projects, S.A.Technology is integrating revolutionary procedures that will safely move and process waste while keeping workers out of harm’s way. Let S.A.Technology help move your project along with safe and reliable waste processing solutions.